QDL for September 4, 2019

3D printing has quietly moved from prototyping novelty to essential tool. Today, 3D printing fixtures can be a quick, low-risk solution for testing and implementing ideas for boosting efficiency. Andrew Edman of Formlabs tells us how.

For more information, don't miss the free webinar: "Lower the Cost of Production With Robust 3D Printed Jigs and Fixtures" on Tuesday, September 10, at 11 a.m. Pacific, 2 Eastern

Read the article: "Cost, Quality, Schedule: How 3D Printing Helps Production Engineers Get the Job Done"

 

QDL for August 30, 2019

Most companies go through rough patches. Lisa Ryan, Chief Appreciation Strategist, with Grategy explains how to help your employees navigate tough times.

Plus Tech Corner: Nikon Metrology's MM 800 measuring microscope.

 

QDL for August 23, 2019

This week: A close look at the Olympus DSX1000 Digital Microscope

We look at a new digital microscope from Olympus. The DSX1000 boasts a 20–7,000X magnification range and the ability to instantly switch between six observation methods. A fast motorized optical zoom lets you optically zoom in and out by simply turning the dial on the console. Advanced algorithms enable you to capture high-resolution 3D images just by pushing a button.

 

QDL for August 16, 2019

We talk to Rigved Raut, founder of McPond, about connecting people who have machine-work but no machines with shops that have underutilized equipment. Plus: We look at probes and probe calibration spheres from Q-Mark

Be sure to subscribe to Q-Mark's YouTube channel.

 

QDL for August 9, 2019

The CMSC is more than just the only U.S. Trade show for large volume 3D metrology. It's metrology education and outreach, increasing diversity in the metrology field, and plotting a path forward for meeting the future personnel and technical needs of manufacturing.

 

QDL for August 2, 2019

This week we look at Nikon Metrology's MM 800 measuring microscope and the iNexiv VMA vision system, as well as CMM-Manager software running on both.

 

QDL for July 26, 2019

This week on QDL we talk about the connection between employee engagement and appreciation and workplace performance with Lisa Ryan, Chief Appreciation Strategist, with Grategy.

Download her book Manufacturing Engagement: 98 Proven Strategies to Keep Your Top Talent from Becoming Someone Else's

 

QDL for July 19, 2019

This week on QDL we explore cobots, robots that work alongside or with humans. Buckley Brinkman, Executive Director and CEO of the Wisconsin Center for Manufacturing & Productivity will tell us what they are and how they are being used.

 

QDL for July 12, 2019

This week we talk with Tom Taormina, author of It Was Rocket Science, about what it really takes to deliver quality products and service. Hint: It's not about using the right quality tools.

Also, we'll look at Q-Mark's interactive CMM-probe design tool.
Be sure to subscribe to Q-Mark's YouTube channel

 

QDL for July 5, 2019

This week: The dead end job

Is it possible to find peace and even prosper under grueling circumstances. Our guest today, Kelly Graves, CEO of Internal Business Solutions, and author of The Management and Employee Development Review, believes there is.