New Beryllium Reference Material for Occupational Safety Monitoring

Material to dramatically improve methods used to monitor workers’ exposure and aid in contamination control.

Published: Wednesday, September 30, 2009 - 15:00

(NIST: Gaithersburg, MD) -- Researchers at the National Institute of Standards and Technology (NIST), in collaboration with private industry and other government agencies, have produced a new reference material for beryllium. Beryllium, an exotic metal used as a hardener in high-performance alloys and ceramics, can cause berylliosis—a chronic, incurable, and sometimes fatal illness. The new reference material is expected to dramatically improve methods used to monitor workers’ exposure and aid in contamination control, as well as toxicological research.

The use of beryllium in manufacturing dates back to the advent of the atomic age. One of the scientists involved with the famous 1942 Chicago experiment known as Chicago Pile-1, to create the first artificial self-sustaining nuclear reaction, died of berylliosis in 1988. Aside from the nuclear industry, the unique properties of beryllium make it valuable in the manufacture of aircraft and supercolliders.

Beryllium dust can cause a condition characterized by chronic skin and respiratory inflammation resembling pneumonia in susceptible individuals, and can increase the risk of lung cancers with long periods of exposure. Treating the particles as a threat, the body’s immune system floods the affected area with white blood cells. The cells surround the beryllium particles and harden to form inflamed tissue nodules called granulomas. These granulomas can lodge under the skin or in lung tissue where they cause difficulty breathing and a host of other symptoms including fatigue, weight loss, and muscle pain. The condition, although treatable, is incurable.

The new Standard Reference Material, Beryllium Oxide Powder (SRM 1877), consists of high-fired crystalline beryllium oxide that has been thoroughly characterized physically and chemically. The particles that make up the powder have an average diameter of about 200 nanometers and have been separated into aggregated clusters that will pass through a 20-mesh screen. NIST scientists Greg Turk and Mike Winchester used a high-performance inductively coupled plasma optical emission spectrometry technique developed at NIST to certify the mass fraction (the ratio of pure beryllium in the beryllium oxide) in the compound. NIST provided its partners with support to perform the preparations and did the final analysis of the solutions when they were completed.

According to Winchester, previous analytical tests for exposure monitoring relied on an easily dissolved form of beryllium that was not representative of what people would be exposed to in the field. The new Standard Reference Material (SRM) mimics the form of beryllium to which workers would be exposed much more closely and should facilitate much more representative and informative toxicological studies, more sensitive monitoring, and more effective clean up of contaminated areas.

The U.S. National Nuclear Security Administration sponsored the development of the new SRM. NIST collaborators included the Savannah River Site in Aiken, SouthCarolina; the Y-12 National Security Complex in Oak Ridge, Tennessee; Bureau Veritas in Novi, Michigan; and the National Institute for Occupational Safety and Health in Morgantown, West Virginia.

Additional data and ordering information for SRM 1877, Beryllium Oxide Powder, is available at https://srmors.nist.gov/view_detail.cfm?srm=1877.

Standard Reference Materials are among the most widely distributed and used products from NIST. The agency prepares, analyzes, and distributes more than a thousand different materials that are used throughout the world to check the accuracy of instruments and test procedures used in manufacturing, clinical chemistry, environmental monitoring, electronics, criminal forensics, and dozens of other fields. For more information, see NIST’s SRM web page at http://ts.nist.gov/measurementservices/referencematerials.

The new Standard Reference Material, Beryllium Oxide Powder (SRM 1877), shown in this scanning electron micrograph mimics the form of beryllium to which workers would be exposed much more closely and should facilitate much more representative and informative toxicological studies, more accurate monitoring and more effective clean up of contaminated areas. Credit: R. Dickerson, Los Alamos National Laboratory

About The Author

NIST

Founded in 1901, the National Institute of Standards and Technology (NIST) is a nonregulatory federal agency within the U.S. Department of Commerce. Headquartered in Gaithersburg, Maryland, NIST’s mission is to promote U.S. innovation and industrial competitiveness by advancing measurement science, standards, and technology in ways that enhance economic security and improve our quality of life.