Featured Product
This Week in Quality Digest Live
Metrology Features
Ryan E. Day
Tri-State Plastics invests in FARO technology to take advantage of growing aerospace industry
Britta Voss
Lack of interoperability among emerging technologies hampers first responders
Andrew Edman
3D printing fixtures is a quick, low-risk solution for testing and implementing ideas for boosting efficiency
Simon Côté
Optimized processes produce quality parts in less time
George Gayton, Rong Su, Richard Leach, and Liam Bradley
Groundbreaking project offers new framework

More Features

Metrology News
From Rockwell to Brinell and Vickers, 16 new systems added
Provides fast and precise external measurements on manufactured parts
As industry transforms with digital manufacturing technologies, skills training must evolve as well
Partnering with FARO Technologies
New capabilities, greater ease of use, and user experience improvements
Structured-light 3D scanner for industrial design professionals
Stereotactic robot helps identify target and deliver electrodes to target with submillimetric accuracy
GOM CT scanner offers highest accuracy and resolution of any 225kV system available today

More News

David L. Chandler

Metrology

MIT Team Develops System for Continuous Medical Monitoring

New system uses widely available, inexpensive video technology

Published: Wednesday, October 6, 2010 - 08:37

You can check a person’s vital signs—pulse, respiration, and blood pressure—manually or by attaching sensors to the body. But a student in the Harvard-Massachusetts Institute of Technology (MIT) Health and Sciences Technology program is working on a system that could measure these health indicators just by putting a person in front of a low-cost camera such as a laptop computer’s built-in webcam.

So far, graduate student Ming-Zher Poh has demonstrated that the system can indeed extract accurate pulse measurements from ordinary low-resolution webcam imagery. Now he’s working on extending the capabilities so it can measure respiration and blood-oxygen levels. He hopes eventually to be able to monitor blood pressure as well. Initial results of his work, carried out with the help of media lab student Daniel McDuff and professor of media arts and sciences Rosalind Picard, were published in the Optics Express journal in May 2010.

Poh suggests that such noninvasive monitoring could prove useful for situations where attaching sensors to the body would be difficult or uncomfortable, such as for monitoring burn victims or newborns. It could also be used for initial telemedicine screening tests over the Internet using a patient’s own webcam or even cell-phone camera.

Such a system could also be built into a bathroom mirror so that patients who need ongoing monitoring, or people who want to keep track of their own health, could routinely get readings for pulse, respiration, oxygen saturation, and blood pressure while they brush their teeth or wash up.

The system measures slight variations in brightness produced by the flow of blood through blood vessels in the face. Public-domain software is used to identify the position of the face in the image, and then the digital information from this area is broken down into the separate red, green, and blue portions of the video image. In tests, the pulse data derived from this setup were compared with the pulse determined by a commercially available Food and Drug Administration-approved blood-volume pulse sensor.

The big challenge was dealing with movements of the subject and variations in the ambient lighting. But Poh was able to adapt signal-processing techniques originally developed to extract a single voice from a roomful of conversations, a method called independent component analysis, to extract the pulse signal from the “noise” of these other variations.

MIT Media Lab student Daniel McDuff, who collaborated on the pulse-monitoring system, demonstrates a version of the device built into a mirror that displays his pulse rate in real-time at the bottom.

Image: Melanie Gonick 

The system produced pulse rates that agreed to within about three beats per minute with the rates obtained from the approved monitoring device, and was able to obtain valid results even when the subject was moving a bit in front of the camera. In addition, the system was able to get accurate pulse signals from three people in the camera’s view at the same time.

The concept of using a camera to detect such health information is not entirely new, but the innovations that allow the use of such low-cost camera equipment is. Fokko Wieringa, senior scientist at TNO Science & Industry in the Netherlands, published a paper describing a photographic pulse-detection system in 2005. “The exciting thing about this new method is that they identify a fixed region on the face and track it (thus improving motion artifact tolerance), plus the clever processing method,” says Wieringa. “The achieved gain in signal quality allows them to use a simple and cheap camera, even on moderately moving persons.” The ability to monitor multiple people at once is also new. “These combined features are very original,” adds Wieringa.

The project won third place and a prize of $50,000 in June in the second annual Primary Healthcare competition run by the Center for Integration of Medicine and Innovative Technology (CIMIT), an organization created by a group of physicians at Boston-area hospitals in collaboration with mechanical engineering faculty at MIT to develop new devices to meet clinical needs. The competition is open to teams of graduate or undergraduate students in engineering from anywhere in the United States.

Poh continues to work on developing the capability to get blood pressure and blood-oxygen measurements from the same video images. According to Poh, extracting such data from optical imagery should work because conventional blood-oxygen sensors already work by using optical detection, although they use a dedicated light source rather than ambient lighting.

Discuss

About The Author

David L. Chandler’s picture

David L. Chandler

David L. Chandler is an award-winning freelance writer and a photographer. Chandler began writing about science in 1975 and since then has authored two books and written thousands of published articles circulated in newspapers and magazines including the Chicago Tribune, Baltimore Sun, San Francisco Examiner, and the Boston Globe magazine, NewScientist, Smithsonian, Innovation, Wired, and many more. Forbes listed Chandler as one of the 500 most influential journalists and he has been included on three Who’s Who lists. Chandler has made numerous television, radio, and public-speaking appearances; participated on several universities’ panel discussions; and serves as a judge for the fellowship’s application process at Massachusetts Institute of Technology (MIT).