Marposs

Metrology

Marposs Announces New Compact Bankamp Machine Monitoring System

Stand-alone system for collision monitoring and crash damage mitigation in machine tools

Published: Wednesday, April 4, 2018 - 12:00

(Marposs: Auburn Hills, MI) -- Marposs Corp. has announced the availability of its new Brankamp CMS-02 stand-alone system for collision monitoring and crash damage mitigation in machine tools.

The system employs a ceramic strain sensor to detect irregularities in the production process by measuring elastic deformation in the range of 0.1 microns, and both slow and dynamically increasing forces which have damage potential. It then reacts extremely fast—in the range of 1 millisecond—by sending a stop signal to E-STOP helping to alleviate or even eliminate machine crashes that can result in high repair costs and long down times.

As compared to previous Brankamp (CMS-1) offerings, the CMS-2 is a compact, single-channel unit. It has 16 bits resolution, 25kHz sampling rate, three operation modes, and three limits per mode (warning, soft-, and hard-stop outputs limits), stop-event data recording, and signal values log file. Visualization of the data, analysis, and statistics, as well as the HMI, is realized by connecting an Ethernet cable to a Windows-based industrial PC unit or the newest IPC4 dedicated monitor.

The system is easy to install and can be retrofitted to existing machines. It does support several communication paths such as discrete I/Os, Profibus-DP, and Profinet. Operators of all skill levels can benefit from it immediately without having to attend complex training courses.

Additionally, the system can be expanded to work in conjunction with the Genior Modular monitoring solution, achieving both collision detection and process monitoring simultaneously and visualizing the processes in parallel.
To date, Brankamp CMS collision systems have been installed on more than 10,000 machine tools, handling systems, and industrial robots worldwide.

More information on the Brankamp CMS system can be found at www.marposs.com , by calling (888) 627-7677, or e-mail to marposs@us.marposs.com .

Image

The Brankamp CMS-02 system from Marposs provides collision monitoring and crash damage mitigation in machine tools.

Discuss

About The Author

Marposs’s picture

Marposs

Marposs supplies precision gauging equipment to industries worldwide for measuring to the thousandth of a millimeter in the workshop environment, production lines, and on board machine tools. Main customers are machine tool manufacturers, automotive and their subcontractors, aerospace, bearings, glass, electrical motors, appliances, consumer durables industries, and gauge and fixture makers. Marposs supplies individual gauging components, turnkey machines, or fully automated lines. Headquartered in Bentivoglio, Italy, Marposs’ U.S. office is in Auburn Hills, Michigan.

Contact Us:
Full Website